Hobart Handler 140 500500 115v 140 amp Welder

Hobart 500500 Handler 140 115-Volt 25-to-140 Amp Gas/Metal/Arc Single-Phase Wire Welding Package

Replacing the venerable Hobart Handler 135, the Hobart Handler 140 comes straight out of the box ready to weld. It can be used both with and without gas, and it performs flawlessly using any of the following wires: mild steel wire, stainless steel wire, solid wire, flux cored wire, or many of the aluminum wires. A great thing for the home user is that this MIG welder runs off of standard household 115 volt power. If you’re going to be welding different materials, or different thicknesses, it has four output voltage settings, wire feed tracking, and a purge setting. These settings enable you to quickly and easily make adjustments that will allow you to weld a much wider variety of materials or thicknesses. The Hobart Handler 140 can weld from 24 gauge up to 1/4″ inch steel, and you won’t have to worry about burn-through.

One of the great safety features that it has is a built-in contactor. This keeps you safer by keeping the welding wire non-energized, or cold, when you’re not squeezing the trigger. That means no unexpected shocks, or arc strikes when you least expect them.

Another great safety feature that it has is a self-resetting thermal overload. This safety feature is provides protection to the welder, and will not allow you to use it beyond its maximum operating limits. If you try to weld longer than recommended, the welder will heat up, and the thermal overload will shut your welder down, thus preventing damage to the wiring inside. Once the temperature has cooled back down to a safe operating level, the thermal overload device will reset, and you’ll be able to weld again.

The welder is ultra reliable and uses Hobart’s proven built-in wire feeder. This feeder has a quick-release drive roll lever that makes switching wire size simple and reliable. With this feeder, it’s possible to use wire sizes .023″, .025″, .030″, and .035″. And if you need to swap polarity, you won’t have any problems due to the extremely easy access. Current Prices Range from $390-$500.

Check current prices at Tool King Click Here

Check current prices at Northerntool Click Here

Check Current Prices at Ebay Click Here

Check Current Prices at Amazon Click Here

This entry was posted in Hobart and tagged , , , , , , , , . Bookmark the permalink.

4 Responses to Hobart Handler 140 500500 115v 140 amp Welder

  1. G.R. Stevens says:

    5.0 out of 5 stars
    Beautiful Welds On 1/4″ Plate
    I bought this welder as a birthday present to myself, and I think I picked a fine gift. This is my first time having used flux-core wire, and it only took one or two tries to…

  2. Dusty says:

    5.0 out of 5 stars
    Awesome little welder.
    It has been over 10 years since I’ve welded. My first project with this welder was a complete exhaust system on my pickup. Easy as pie!

  3. Anonymous says:

    5.0 out of 5 stars
    Amazing Unit
    I bought this for random projects around the house, and it blew my expectations out of the water. I had assumed that because it was 120v, I wasn’t going to be able to do much–…

  4. Steven says:

    5.0 out of 5 stars
    Excellent welder and customer service
    This welder arrived with a broken plastic cover hinge even though there was no sign of rough handling on the very strong factory packaging.

Leave a Reply

Your email address will not be published. Required fields are marked *